Hi welcome again to the escuadron111, this is the Falcon wing in the section today discover
this is obviously an F16
today´s panel is the ACMI one, the AVTR panel
AUDIO VIDEO TAPE RECORDING
one second to focus on the panel
this one
forget that sound
this is the AVTR
one button, two lights
one switch and one knob
the switch is in the off position
system is not working due the off position
there is the auto position
in some BMS versions this lights come up in yellow color
in green when recording the acmi
in auto mode, when you release a weapon
the acmi will be recording for 30 seconds
have in mind the BMS acmi recorded everything around the plane
you can see that ACMI with the BMS tool or the tacview
the real life ACMI only record what is selected in that knob
it could be selected the HUD, recording what it seen from the HUD
there is a small camera to recording it
best use the track it to move the view
the camera is this thing over here
that record the HUD and what the pilot see through it
I already said the HUD can be recorded
with left, the MFD left will be recorded
with right will be the right MFD
the AFT position
means that will be recorded what is selected on the back cockpit
the instructor will decide what record
in this case, that is a one pilot plane, AFT have no sense at all
because it´s a standard panel, the position still existing
this is done to save money in the plane design
auto will save that 30 seconds that it´s selected
many times in AA there is not enough time to know if the missile hit or not
you can custom that in the falconBMS.cfg file
and you can select the time you want
the on position
the lights are now green
auto must be yellow, until recording
now the acmi is recording
the real life pilot could switch any time the source
the test button of course, only make a test of the system, is not implement for the moment in BMS
and the lights , the mnemonics AVTR is on
now I am going to change the cockpit......
because this panel change in a MLU version
let´s see the difference
an F16 MLU now
let´s see the differences
the F16 is off
there are no light in the AVTR panel here
as you see the panel is missing
no panel
see
other panel can fill this gap
the AVTR panel has been implemented here
see this swith, off , display and on
in this case, with the MLU the system has been upgraded
the memory is now bigger
now the AVRT is always on
when the plane comes on
or with the battery
when the avionics switch is on, the system will be on also
the pilot only can set to not recording, off
display or HUD
the system will be always powered up
because the memory is now bigger
when recording in display mode, both mfd will be recorded
or the hud
that was IRL
in bms displays is the auto mode and hud is just on
remember in BMS you record everything around you, you don´t need select what you want to save
it will be cool can record the display aside, but for that you have to use other tools
i hope you enjoyed the video and learned something, subscribe to my channel and enjoy



Không có nhận xét nào:
Đăng nhận xét