Hey guys, How are you?
I'm Vale, and I welcome you back to my channel
Valkitty's World.
Today we're going to make something different.
In my last video
I mentioned other activities that I like to do
besides the illustration,
among them doll repainting.
As its name says
it's about customizing a doll painting it again,
which is just what we'll do with this little
She's a Clawdeen Wolf from Monster High
that I rescued from the biggest bazaar in my city
So, this is the sketch I made for her.
This little witch is inspired
by Jacquelin de Leon's witches
one of my favorite illustrators.
I love the style she uses for them
so I couldn't resist making my own.
What do you think if we start?
The first step is to cut the original hair
as close to the head as possible.
This is not completely necessary,
If you want to preserve the original hair of the doll, you can do it.
However, in my case, the doll had a serious sticky hair problem.
so I had to take it off.
Once this is done, let's remove the head.
For this, I use a hair dryer
and I put it directly on the head
until it becomes squishy
to be able to remove it
without damaging the neck mechanism.
And what I'm going to do now
is to remove the ears to follow my design.
Done this, I will reserve them for later.
Now, the next step is to remove the hair
from the inside of the head.
I like to use a plain slotted screwdriver
to be able to push the glue first
until all the hair comes out
and then to remove the waste with pliers.
It is very satisfying to see
how the head is completely clean of hair.
This part is very unpleasant
'cause your fingers become too sticky
but it is necessary to do it.
Look at all that horrendous glue.
So, now let's wet a cotton with acetone
or with nail polish remover
although it is a bit slower
to remove the factory paint of the doll.
with swabs you can reach the most difficult parts.
Once it's clean
let's reposition the ears.
first I'll mark with a pencil
the place where I want them to be
and then, with a thin wire and round pliers
I'm going to make a kind of knot.
We make one for each ear
and glue it in the hole that is inside.
Once dry, we put it on the head
and we try to secure the wire inside
so that it doesn't come out.
And now I'll close the holes
with epoxy clay.
So, what is epoxy clay?
It's a clay that hardens
It's a clay that hardens before the chemical reaction
of two parts: A and B.
This is the first time I use this clay
so I practically just learned how to use it
With latex gloves
let's take equal parts of A and B
and mix them.
To apply it I used water
and a sculpting tool
with a sphere on the tip.
From time to time it can stain,
be careful with that.
It was a bit complicated, but in the end I got it.
Now let's move to the body.
For this you, can use a water sandpaper or an ultrafine one
a nail file also works well.
And what we will do, will be to smooth
the plastic joints.
and at the same time, to remove the varnish
that has the body on.
It's very usual to find situations like these.
We can remove that plastic with a cutter
and sand again.
And now, we go back to the head.
Once the clay is completely cured
let's sand it a little so it's not so rough.
And we have reached the most exciting part.
To work on the face, we need a sealant.
In this case, I'm going to use this one
which is called mr. super clear.
It's the basic one that everyone uses for their repaints
but it's expensive.
We spray the head about three times
and let it dry for 30 minutes.
To work, we're going to need some watercolor pencils
and chalk pastels.
What I'm doing right now
is panting the clay with acrylics
and we're going to start shading
with pastels and a brush.
Here I applied a little blush with pink
and now, with a brown pencil
we begin to sketch the eyes.
Once we are satisfied with the sketch
it's time to apply the black pencil.
And we do the same with the eyebrows.
This gray thing you see here is a kneaded eraser.
It is very useful to remove the residues of pastels
This is about filling in the colors
with each layer of sealant.
A layer is applied, then color, (My cat assistant XD)
then another layer, then color.
It depends on the design the amount of layers that are needed
and the opacity you want for the final result.
(I think she already likes to show up...)
(Bombón!!!)
Here I already finished the first layer
so let's apply sealant to do the next one.
Then we follow the same steps again
until we get the opacity we want.
I tell you, I knew this activity any day on YouTube
when a Dollightful's video appeared in my recommendations
who is one of the most famous doll artists
and, to date, my favorite.
She has very nice works, I'll leave here a photo.
If it's easier for you, you can also use acrylic paint.
Once we put the shines of the eyes,
we can apply a last layer of sealant.
And we are going to do exactly the same with the body.
We apply sealant, wait for it to dry and start to blush
If you don't want to do this step, there is no problem,
but I recommend it because it gives a lot of life to the plastic.
and now, we'll proceed to make the tattoos.
In the same way, I started with brown pencil to make the sketch
and later I darkened the lines with black pencil.
I must confess that I'm not very good at making tattoos,
but I did my best, I hope you like them.
This was the arm tattoo
and now we continue with the torso tattoo,
which was especially my favorite.
In the same way, I did the two leg tattoos.
in the foot tattoo,
it didn't work only with the watercolor pencils,
so I did it with acrylic paint.
We continue with the clothes.
These were the patterns that I made for the tunic and the short.
For the short, I used a dark red satin fabric,
and for the tunic, a black stretch fabric with texture.
I made the bra with a pair of triangles and thread,
and for the shoes, I chose this pair from a Cleolei doll.
I only changed the color of the sole,
first black and then brown.
To protect the painting of the sole,
I'm using this matt varnish
diluted with some water.
And to complete the outfit,
I made these two necklaces with thread.
For the broom,
I got this pretty root brush scrubber
and this twig.
First, I painted the twig with a black base,
and later, I painted it brown.
And then I had to break the poor brush scrubber.
little by little, I was taking out
the roots that I considered necessary,
and then I stuck them at the end of the twig.
Once the glue has dried,
It's time to shape the broom.
I reused one of the wires to hold the inside,
and then, with hemp thread,
I shaped the broom.
And this was the result.
And now follows the hat.
As a base I used craft foam,
and with a casque that I already had,
I drew the width of the head.
And then I made a circumference around
for the volume of the hat.
We cut it out and take away the center,
and on the chosen fabric, we draw our base twice.
We leave the center of both sides open
and then sew them around.
Before turning it out,
we make some small cuts on the border,
and we put the craft foam base.
Now, with the same fabric, we cut a triangle,
fold it in half and sew it.
In the base of the hat,
we glue one of the edges inwards.
And finally, we sew both pieces together.
And now our last step: the hair.
This one that I'm using is very long,
so I'm going to cut it in half.
Now, I used an acetate sheet,
a plastic knife
and cold silicone glue.
We take a lock of hair,
extend it, apply silicone
and spread it with the knife.
Once dry, we flip it out and do exactly the same.
What I like about using a plastic knife
is that you can simply clean it and use it again.
The final result we'll obtain, is this.
In my case, I directly glued these hair wefts
on the head with UHU.
We are gluing the wefts horizontally
from the bottom to the top.
When we have reached the hair division,
we are going to glue a new weft
and bend it in the opposite direction.
And we do the same with the other side.
To give texture to the hair,
what I did was to braid it
and let it rest in boiling water
for about 5 minutes.
After a few hours, when the hair is completely dry,
we can untwist it and see the final result.
And finally, I styled it with scissors.
Now that everything is finally ready,
we can put the head back on the body.
to finish, I put metal loops on their ears as earrings.
And she turned out like this
In the end, I had to make a new hat
because the first one I made didn't fit,
but I used exactly the same technique.
I decided to call this little girl Hilda
I tell you that she is available for adoption,
if someone is interested, you can contact me via instagram.
I hope little Hilda has liked you as much as me.
Of course, don't forget to like and subscribe
if you want to see more of my work.
See you until the next video.
Bye bye.
For more infomation >> 
For more infomation >> 
For more infomation >> 
For more infomation >> 
For more infomation >> 
For more infomation >> Lakeland News at 10 (October 31, 2018) - Duration: 33:11. 
For more infomation >> Arirang News 이지현 기상캐스터 20181101 - Duration: 1:52. 
For more infomation >> Fox News @ Night With Shannon Bream 10/31/18 11PM | October 31, 2018 Breaking News - Duration: 33:58. 
For more infomation >> Rick Does News - Duration: 1:04. 
For more infomation >> NOCHE DE PAJAS - Duration: 59:23. 
For more infomation >> Noticias Telemundo, 31 de octubre de 2018 | Noticiero | Telemundo - Duration: 22:00. 
For more infomation >> Hora de Brincar #8: Pé de Lata - com Libras - Duration: 9:31. 
For more infomation >> Dia de los Muertos begins Thursday - Duration: 0:16. 
For more infomation >> Uomini e Donne, Maria De Filippi furiosa con un tronista: ecco cosa è successo | Wind Zuiden - Duration: 4:31. 
For more infomation >> Mario Velasco sacó carcajadas con su disfraz de Halloween: Se convirtió en chica superpoderosa - Duration: 1:59. 
For more infomation >> La impresionante locura de amor que Juan Pedro hizo para recuperar a Karen Paola - Duration: 3:14. 
For more infomation >> 
For more infomation >> 
For more infomation >> 
For more infomation >> 
For more infomation >> 
For more infomation >> 
For more infomation >> 
For more infomation >> 
For more infomation >> 
For more infomation >> 
For more infomation >> 
For more infomation >> 
For more infomation >> 
For more infomation >> 
For more infomation >> 
For more infomation >> 
For more infomation >> 
For more infomation >> 
For more infomation >> 
For more infomation >> 
For more infomation >> 
For more infomation >> 
For more infomation >> 
For more infomation >> 
For more infomation >> 
For more infomation >> 
For more infomation >> 
For more infomation >> 
For more infomation >> Trick or treat News 2 at 6 p.m. - Duration: 1:44. 