www.Bembeltown.de
www.Bembeltown.de
For more infomation >> Révolution esthétique à la salle des fêtes de l'Élysée - Duration: 9:20. 
For more infomation >> WEBINÁRIO PLANEJAMENTO DE MARKETING PARA SUA MARCA PESSOAL 24.01 - Duration: 1:39:33. 
For more infomation >> Le noyau d'avocat est un trésor de la nature qui prévient le diabète, l'inflammation - Duration: 6:17. 
For more infomation >> Artistes de la bière: Le Secret des Dieux - Duration: 14:31. 
For more infomation >> Miss France 2019, Vaimalama Chaves folle de Malik N'Diaye, la vérité sur leur relation - Duration: 1:27. 
For more infomation >> Paula fala de namoro com homem dez anos mais velho: "Eu tinha 13 anos" - Duration: 5:08. 
For more infomation >> Invité surprise d'un concert de Lady Gaga, Bradley Cooper reprend la chanson phare - Duration: 1:03. 
For more infomation >> MBA EAD Fundace/USP Finanças - O Papel do Profissional de Finanças com Fabiano Guasti - Duration: 1:16. 
For more infomation >> Çöp PC'DE Tüm Oyunları İndirmeden Ultra Ayarlarda OYNAMAK !(playgamehub) - Duration: 4:56. 
Hi all. In this video we will be able to see in RealWorks what are the
different views of the point clouds. We will do the visualization in a box,
measurements of distances, geometries or angles, in addition to having the different
views, change the thickness of points, shaded, et cetera. You have to have in
notice that the views are very important to be able to optimize greatly
measure our results. Thanks to have a good visualization we can
get different geometries, we can get different measurements and we can
see things that other views do not We can see.
If we open a project in RealWorks We will have a series of tools in
the part of the left that are the exactly the same as we have
at the top in the section on view, it does not matter if we are in the
registration or production section. The first tool is the
display in box. With this tool we will select a point of
the point cloud and automatically we will create a box. This box will have a
Apartadito with tools in which we can
make the box bigger or smaller at our whim, as we see here, we can
remove the top part, the part of below and also the background. We are going to
adjust it a bit and we leave it as we want.
The next tool we have is move. This what will allow us is
move the box up or down to left to right or forward and backward.
The following tool will allow us rotate the model from a sphere.
We can rotate it as we want and as best fits. Then we have
the tool to show the entire cloud of points or only the box
and remove or not put the box and then later we have
a series of vision views both left upper right to be able
have a better visualization we are going to put to see it from the left and
that fit us The other two tools are to select the
center of the square that we are using. If we put this tool aside
and we enter with the tool measurement, we will have a series of options
to take measurements in the cloud of points directly.
The first tool of all will allow us select a point and another point and
get the distance
The next tool will allow us to fix the
model on a 2D map and measure over that map the next tool what
will allow us is to make a measurement horizontal by selecting a point from the
left and one to the right of the wall no matter what it is and the measurement
he will do it in a way that is totally horizontal the next tool we
will allow the height measurement selecting the top part and the
downstairs our roof and our wall after
we have another tool that simply selecting the bottom part pull to
one vertical up in the same way we have another tool
than selecting the top part will throw a vertical down
the following tool will allow us perform a measurement from a set
of points that define one plane to another point in this case we select first
that set of points and something we will generate a small plane and
we will select another point in this way throw at a distance totally
vertical the next option allows us to obtain
the length of a cylinder so that we can know what the diameter of the
internal circumference that has inside the next option will allow us to measure
the distance between a point and a existing geometry that we have in this
case I have drawn some before and the only thing I do is
select the geometry and another of the points later we have the option to go
adding distances as if we were drawing a polyny
the next option that we have serves to get an angle simply
we will select three points and we will get our angle after
we have another similar option that what makes us create the angle in a plane
horizontal simply by selecting three points
then we have another way to get the angle that is selecting a point and
another and he wants us to generate the angle that we get in relation to the
vertical we want to be the example
and another option that we have respect angles is to select a
geometry and another and from them two calculate the angle between the two
the next option is one of the most generic which is to select a point and
get your coordinates we approach the point and we just click it and for
last the other two options that we have is to obtain from
example a set of points that generate a plan or a small compass
in quotation marks that will indicate which is the north if also this also what
we can do by selecting three points
everything we generate with the tool of measurement we can save it if
we leave and go to the next visualization tool we will have
three options one is the visualization by means of the examiner tool
the other option that we have is that of view per station in this case we can
activate the parking lots and enter directly by double-clicking
if we enter the option of examiner we can move the cloud of points of
points by dragging it with the button left the other option is the
travel in which we are moving the camera and we are moving the mouse of
way that we are moving as if we were walking next
I turn off the view of the parking lots and we can see that we have two ways of
see it once in perspective and another one is with isometric this is the view of
perspective in which you see everything with a vanishing point and the next option is
the view in isometric after we have the options to see the model from
front to back left and so on then we have another option that we
allows you to hide the whole cloud of points we will simply have to click on
this section we select and automatically
disappears
let's select the point cloud What interests us in this case is that of
office that we have here already created then the other options that we have
is to turn on or off the triangles that what they do is identify each one of
the scans and on the other hand see or not see them the name of each of the
scans on the other hand we have the different visualizations one is by the
cloud color of points another by the color of station in station will come from
one color on the other hand we have the color by
by grayscale after we have another one that is the true color that since
outside that does not look very good but if we enter inside one of the scans
we double click and see that everything is with its true color
then another of the options that we have of visualization is that of intensity
of the point cloud in this case we can see what the intensity of
each of the points from blue with higher quality or red with
worse the display by elevation what we see now later and the color by
classification we colored it in function of point clouds that
we have classified in this case as not we have done any everything shows us in
yellow but if we had classified the floor the ceiling and the walls would come out
each one of a color we can also change the thickness of the
points to see more or less each of the points we have and on the other hand
we have the visualization of the cloud of points with this section here that is with
filters in which we can change it for example to see the inside view and
see what we have within the Offices
then another of the options that we have is the view of the outline contour
what will make us classify the cloud of points and only show you the
edges that we have inside edges like the skeleton of the whole cloud of
points finally we have the options of
shaded we can not use any shaded let's go to an environmental shading
another environmental improvement and finally the normal shading option these
visualization is what they allow us is as in a photograph change the
exhibition we are going to change the project to this project that is a stockpile in the
which will we be able to see better the display by height
Once opened we can select the intensity of the point cloud by
elevation in this way we can see what are the parts of the cloud of
points that are higher
Đăng ký:
Đăng Nhận xét (Atom)
Không có nhận xét nào:
Đăng nhận xét