Hi! Today's tutorial is perfect if you want to introduce you to the world of iniatures
This Strawberry Cheesecake is easy to make and will look great on you.
Even if you're already experts in this discipline.
you'll find some very useful tricks for your scenes and dollhouses creations.
Let's begin!
As usual, let's start by mixing our colors.
In this case I have used yellow,
white
translucent,
purple,
and black
all of them from Cernit.
For the base of the cake, let's mix
four units of yellow,
three units of white,
three units of translucent,
a unit of purple
and an eighth in black.
Remember that we add the translucent because it brings a touch of reality to the mix.
If the color were completely opaque it would look too artificial.
Notice that to get a light brown tone,
we're mixing the yellow color with its complementary, purple.
When we add a small amount of the opposite color to a tone
what we do is desaturating it and neutralizing it. 25 00:01:28,540 --> 00:01:32,000 This is precisely the property we've used in this case.
We'll mix all the colors together and get this nice cookie shade.
For the cream cheese mix 8 units of white,
with 3 units of translucent
and a quarter of the cookie tone we've previously obtained.
What we want in this case is a dirty white,
but which is consistent with the tone of the cookie.
That's why we've mixed white color with base color.
We pass the cookie color through the thickness 3 of the pasta machine.
And with the cream cheese color we make a sheet in the thickness zero and another one in the number 3.
We stack all three leaving the cookie color underneath.
Because we're working on a scale of 1:12.
we're going to use a round cutter about 2 cm in diameter to cut the cake.
What would be a cake about 24cm in diameter in reality.
We'll start by giving texture to the base of the cake.
We'll help each other with a sharp-needle tool,
with which we will make small circular movements.
To work more comfortably you can place the clay on the blade,
Besides, this way you won't deform the piece.
Now we take a soft toothbrush
and we worked with it, all the edge of the cream cheese.
Once this is done we will use the needle tool again to make the texture more visible.
To make strawberry jam
we're going to mix liquid clay with red ink in two different colors.
Specifically, I've used Darwi Glass
because it has a very interesting characteristic.
This ink boils at temperatures higher than 130ºC.
So if we bake at about 145 degrees,
nothing will happen to the clay
but the ink will bubble and solidify
leaving an irregular film that will look very much like jam.
When we mix,
we won't do it uniformly, because we want to have different shades of red.
Pour a small amount on the cake and spread a little.
Now we put a couple of drops of the inks, directly.
and extend a little without getting the color all blended.
Pay attention to the effect that the inks made with liquid clay.
As you can see, they look like pieces of fruit in a jam.
The next thing we'll do is add gloss by using a glossy varnish.
We'll give a pretty generous coat,
but that allows you to continue seeing the texture of the jam.
We're gonna use a piece of cardboard from a real cake tray.
and a circular cutter, in which we will put the measure that we look for.
Once the circle has been cut, sand the edges a little with a soft sandpaper.
and we'll glue the cake over it.
That's all, I hope you've learned a lot.
If you liked the video, givea like.
You can also subscribe to the channel and share.
Any doubt or suggestion, please leave it to me in the comments.
See you in the next video.
Không có nhận xét nào:
Đăng nhận xét