Waching daily Jan 31 2019

My videos are with subtitles

drill stand - POWERFIX LIDL

hello, POWERFIX drilling stand - 21,99 €

vise with quick clamping device

precise drilling in wood, metal and plastic

drilling depth: 0 - 60 millimeters

instructions for use + screws + tightening wrench

the foot (1.72 kg)

the vise (0.43 Kg)

the head

Assembly on the secondary chain

locking screw (it will be necessary to loosen to lower)

graduation from 0 to 60 millimeters

clamp - 43 mm (tighten with the key)

down the vise (we can adjust)

a button to tighten / loosen quickly

a small tightening handle

4 fixing holes

67.5 millimeters max

stop adjustment

example 20 millimeters

I climb the stop (loosen)

you loose, you go down to 20 millimeters

I squeeze

I tighten the stop

to hold the mounting key

she hangs at 20 millimeters

if the stop is not fixed, it still hangs at 20 millimeters.

42 to 43 mm / no more, no less!

PARKSIDE PSBM 750 B2

compatible with drills with a 43 mm collar

here it must be 43 millimeters

42.93 millimeters

also the chuck must not be less than 43 mm

it is compatible, then serer

other drill

a small element protrudes, it is a little more than 43 mm (43.89 mm), it is not compatible

I'm stuck, even by spreading a little ...

test

the support is not fixed ...

I forgot to disable the percussion! you do not have to put the percussion: p (I disable)

when the support to adjust, finally it is necessary to adjust only the vice, I adjust and I tighten

differences

I checked the holes on the 4 sides (we are still 1.8 to 2.6 cm, good accuracy)

the board is not perfectly it can explain differences

here, all measurements and deviation in millimeters, the deviations are very small

finally correct accuracy (on a length of 35 centimeters!)

conclusion

Moderately practical, but it does the job (+) price, correct accuracy, drilling height 60 mm (see more ....), quick release vice 6.7 cm, stability

good stability (when it was not fixed)

works well with this little PARKSIDE drill

drill more important, it would also work if I could put it ...

he should have put quick clamping elements (and not a key)

the same for the vises, you need a wrench to tighten (quick tightening would have been practical)

to change drill bits it is not practical with this drill

finally it is only compatible with drills with a collar of 42 to 43 mm (which limits the number!)

thank you for leaving, thank you and see you soon ++