Hey, B-Army! In this video, we gonna see the Britney's clips that have 100 millions of views on YouTube.
Let's go to the video!
Videoclips that are next to be with 100 millions views:
For more infomation >> C'est prouvé ! Le café permet de maigrir naturellement - Duration: 6:56. 
For more infomation >> Laeticia Hallyday humiliée, la redoutable vengeance de David (photo) - Duration: 3:57. 
For more infomation >> El desatino de Tomás Cancino en despacho con haitianos que Tonka tuvo que interrumpir - Duration: 3:02. 
For more infomation >> ¡Los Demócratas ganaron el poder de la Cámara! | Un Nuevo Día | Telemundo - Duration: 3:41. 
For more infomation >> Koopwoning: De Looch 36, Vianen - Duration: 1:10. 
For more infomation >> 3 Increíbles remedios para deshacerte de los molestos mocos - Duration: 4:30. 
For more infomation >> "Son care' raja": Patricia Maldonado se lanza contra "actores de izquierda" que la criticaron - Duration: 4:00. 
¡¡CODIGOSDTC.COM!!
Know, what are the causes that cause problems in your car?
¡¡Examine the symptoms your car presents under the guidance of experts in mechanics!!
¡¡And get the final solution of the fault codes that diagnose your automotive scanner!!
¡¡All here in CODIGOSDTC.COM, Your OBDII code library!!
P0017 - CRANKSHAFT POSITION - CAMSHAFT POSITION CORRELATION (BANK 1 SENSOR B)
The CKP sensor (crankshaft position sensor)
and the CMP sensor (camshaft position sensor) work together
in order to control the delivery and the fuel time.
The two sensors have a reluctor ring, which goes through a magnetic sensor.
In addition, the ring generates a voltage that indicates the position of each component that indicates the sensor respectively.
The Crankshaft position sensor (CKP) is part of the primary ignition system and is the trigger.
It takes into account the position of the crankshaft relays, and then sends that information to the Power Train Control Module (PCM)
to manage the timing of the spark.
On the other hand, the Camshaft position sensor (CMP) detects the position of the camshaft,
and then transmits that information to the Powertrain Control Module (PCM).
Then the PCM with these data can determine the beginning of the sequence of the injector.
These sensors and their two axes are linked by a belt or distribution chain.
The timing of the cam like the crank should be precise.
In case the PCM detects that both signals (cam and crankshaft) are out of time for a specific number of turns, the DTC code P0017 OBD2 is established.
Symptoms of the DTC code P0017 Generic
• Check Engine light illumination.
• Engine performance is reduced.
• The engine may not start.
Causes of DTC code P0017 Generic
Fault code P0017 OBD II is established due to the following:
• Wear of the belt or distribution chain.
• The timing belt or chain may be misaligned.
• Perhaps the tone ring on the crankshaft is defective.
• Tone ring on the camshaft may be defective.
• Cables leading to the defective camshaft position sensor.
• CMP sensor controller solenoid in short circuit.
• CKP sensor defective.
• CMP sensor defective.
Possible solutions of the DTC code P0017 Generic
When establishing the DTC code P0017 you must do the following to correct it:
• Performs an inspection of the cam and the CKP Sensor.
Also check your cables and connectors.
If you find worn or defective cables you should proceed to perform the necessary repairs or replace if necessary.
• With an endoscope you should check the cam and crankshaft patterns.
If you notice that a pattern is missing, it is indicative that one of the sensors is defective, or a ring tone is sliding.
For that, you must remove the cam gear together with the crankshaft balancer.
Then, check the tone rings for correct alignment and good connection.
If there are no problems in these, change the sensor.
• If after making the readings, the signal obtained is within the expected range, you should check that the distribution chain or belt has a correct alignment.
If you notice that it is misaligned, check the tensioner, as it may be defective allowing the chain to slide.
It also checks the status of the chain, as it may be stretched,
repair or change as necessary.
¡¡Subscribe to receive updated information from our DTC code library!!
¡If you have any doubt or suggestion, leave us your comment!
For more information ¡¡Go to CODIGOSDTC.COM!!
Đăng ký:
Đăng Nhận xét (Atom)
Không có nhận xét nào:
Đăng nhận xét