Waching daily Oct 2 2017

Whats up guys, in this tutorial I'm going to teach the basics of a manipulation or fusion of images

I will divide into 2 videos

In the first one I will demonstrate how to ambient image of the model on the background

arranging the colors of it, etc.

and the second one goes be part of the lighting, shadows and some touch-ups.

So, lets go

I'll make a copy here in the background.

and now we'll get the image of the model

I will put the link of the images used in the description of the video

now let's fit the model on the background.

Done

I'll narrow the sides here of the image.

Now we go in the model layer and rasterize the layer.

Now let's go to Image> Adjusments> Match color

Here in source we will select the project, and here in layer we will select the layer 1

Thus throwing the background colors in the model.

Let's make some adjustments here, I'll put the fade in 70, and put the luminance at 40, then just press OK.

Now let's go to Filter> Camera Raw

What we're going to do here is to increase the details of the model image so that it fits better with the Background.

I will increase here in clarity, a little.

then let's detail here above, and increase here too.

now just press OK.

Let's go back to the background and convert it into a Smart Object

then go to Filter> Blur> gaussian blur

we will give a light blur in the background, then we will remove a of the blur near the model

with the mask marked layer is just black paint to remove.

Let's now adjust the colors of the model

let's down and then Gradient Map

click here to link in the layer underneath it would be the model layer

and click here to change the colors

in the first color we will put a medium orange and yellow

which is the color that makes more part of the background

and in the second we will choose the black color

then we will change here for Soft Light and we will decrease the opacity of the gradient.

you notice that the color of the model already fit better with the background

just doing these 2 techniques, but let's try to improve this

Let's go downstairs again and add a curves

and again linking in the layer below

here I will make small changes always with the idea of ​​setting the model on the background.

I will decrease a little here the opacity too

I will settle only a little here.

I'm going to add another gradient map

now a black and white

we'll switch here to Soft Light and decrease the opacity

I'll put a last gradient here

let's use this one right here

Switch here for luminosity

Done, the colors of the model are already about the environment

let's go here in the model layer

and go Blur tool

when the background is a little blurred, i like to blur the edges of the model too, to improve the interaction with the background.

I'll speed up the video

will fix this part here that I did not realize when I did the Image clipping

A tip for those who like to post the images on the facebook

come here in Image> Image size

What we're going to do here is change the highest resolution value to 2048

so the quality does not is so degraded in facebook

at the end of the second part I will show how to save in a good format to be posted on the face.

Then guys in the next video I will complete this manipulation teaching Illumination, shadows and other things.

See ya in next video, Thanks for watching.

For more infomation >> Basic Of PhotoManipulation - Part 1 | Color Settings | Photoshop - Duration: 6:59.

-------------------------------------------

Mini bulrush chair - Duration: 4:53.

Mini chair

We need wooden sticks for skewers.

We cut everything as in the image.

The plywood will be the seat of our chair.

We cut it into four pieces, and round off the outer corners.

To simulate the bulrush, we use esparto.

We separate the thread in the three threads that form it.

We take one of the triangles that form the seat, and we give a coat of white glue.

We glue the esparto.

We do the same for all the triangles. Then, we glue the triangles again, forming the seat.

To the longer wooden sticks, we make two marks at 1,5 cm, leaving a distance between marks of a couple of millimeters.

With a cutter we make a grooves in the marks.

Then, we passed a file through the grooves and try to give a rounded shape to the part of the center.

We do it for the two pieces of 4,5 cm

To the pieces of 2 cm, we make two others marks in the center.

And at the same height for the large pieces.

We stick the four legs to the chair, trying to stay at the same height.

We make two balls with air drying clay, and glue them on the top of the longest legs.

For the backrest we need two toothpicks and a plywood of 0,5x2,8 cm.

We make a drawing to the plywood with a file.

We do the rest of the backrest with toothpicks. Once we have the pieces, we glue them with white glue.

Glue the backrest to the chair.

We painted the chair.

We finished to decorate the chair.

Thank you very much for watching the video. Like and share.