Hello Hello!
Welcome back to the channel in the video today I will show you another option
very similar to the one I showed you in the video Previous of SanNcut in the with the machine
cut the stamps that we stamp, both those stamps that normally in the market we find
with dies like seals that are sold without die and any of them we can
cut with the ScanNcut how I show you in the video that I link both above and
the information box below
Another option that this tool gives us when having a scanner is that we can scan the
cut-out sheets that come to us in many of the collections of scrapbooking papers
and make the most precise cuts, give them more or less margin around the cut.
I already showed you in an instagram story a small sample and there were many
you asked what machine it was and how it was done and I'm going to make the video explaining
how do i do it
First of all we turn on the machine, I will use one of the leaves of Dayka Trade,
of the new communion collection of 2018, I leave the link in the information box
from where you can buy it And the first thing I have to do is cut
this line that can be cut easily with shear
and this same can be cut quickly with the Shears.
Once I have cut it I put it on the cutting blanket, position it at the entrance of the
machine, as every time we start we get the positioning option,
now we give to scan and load mat that is this button here
And we give a direct cut, here as I explained in the previous video we can adjust
the recognition mode in gray or in color.
I give it to color and automatically when we select we put the button in yellow
to start the scan, we give ...
We already have here what it has scanned, when we scan, in this case it is a pretty sheet
large and with the red arrows we can drag to adapt to the full scanned part
or we can do it in parts.
I'm going to make it complete to see if you recognize all the illustrations, usually not what
It recognizes everything at first and it has to be done several times, we give it to start and start
recognition.
He has recognized everything at first perfectly without problem, inside this screen we can
give it to zoom to check closely that all the lines are on your site.
We give OK and this is where we have the options in which we can make the cuts
with outer edge as when we use the stamps that go with seal, you know that
there is a white margin because with this option we can give
more margin, leave it without margin or even give inner margin to cut inside
of the lines.
I'm going to leave it so that I cut along the line of the drawing, I give OK and the options that
are going to appear are the drawing, cut or this below with red marks, which we
will serve to eliminate lines or strokes that we do not want to be cut
Here we have several lines that have nothing to do with the illustrations and we do not want
let us make those cuts.
Within this screen we have the option to manually select one by one and give
to the trash button to erase. with the two arrow buttons we can move the
red marks on each of the pieces drawn until you reach the one you want to erase
and then we have this other button that has 3 squares in red that will allow us
select several things at once and delete them all together to go faster.
The rest of the paths we want to cut it, we give OK and cut, automatically
turn yellow on the PLAY / PAUSE button and we give it to start the cut
Here I am explaining that on the screen of the plotter we can see the duration of the cut.
Now we simply remove ...
And that's how our cuts would be perfectly cut.
I have to say that being dark tones have been cut from one and quite well, when you have
lighter colors cut it equally but there I do it more times.
We will have to work on the same scan two or three times or when we already detect and cut
the first pieces re-scan the images that we have left.
We're going to do another test with other softer tone papers, in this case it's the
2018 communion collection of LITOARTE, to see if I recognize the lines well,
that I have to cut them for the next tutorial that is a communion album that
you have already seen in the INSPIRATION playlist here on the channel, it is an album
in leatherette that I made with the same collection but as a girl and I will do the same
album with tutorial and for child, as I have to cut these pieces we give it back
to go to the beginning.
We give direct cutting with color recognition and start scanning ...
let's check if you have recognized the lines of the images with the other papers
We have not had any problems, he has recognized everything at once.
Here if you have recognized any of the lines, especially the tags and circles. we give him
ok to go to the next screen on which we can select what we do not want to cut us
and now here what we are going to do is to go selecting the parts
that we want to eliminate.
If we give this other option what we do is select all the brands and press
about the pieces that if we want to cut us to deselect and so we will work more
fast because there are many more pieces that we want to erase than those that we are going to keep cutting.
The rest is what we have left and we will eliminate.
This is what at the moment we are going to cut, press in cut and when the button turns yellow we start the work.
As you can see, these parts have already been cut all right.
Once he has done this to us we can go back and work on the first scanner or I can
example what I do when the scanner It's hard to recognize some elements of the paper
what I do is cut, for example here I have left only this part and if there is any drawing
that does not have well-defined lines and the scanner does not
recognize what I do is with a pen review a little, I review the edges to help the
plotter to recognize those lines because for example there are some that are too clear
and being with a pen once we do the cut we can erase the drawn lines.
Look, I have marked for example the top part of the book because when I was white I did not recognize it
the scanner and this piece equal frame with pencil.
We will place on the cutting blanket on the guides, we give direct cut and scan ...
we adjust with the arrows the scanned image, we give OK ...
And it already detects us enough images we give it OK OK
and in this screen we do the same operation as before, we select everything and we will click on the pieces that you have recognized
correctly and therefore we want you to cut us
We give OK and erase everything that has been marked in red.
Ok to cut ...
Here we have the pieces that have cut us, this same thing we would repeat the time it was
necessary, as you see I have given you two examples, one in which the lines were well defined
like the first ones in the Dayka collection and that the first one has recognized us and cut us
and then this other example where some lines are better defined but others
They need some help that we can solve with a pen.
Well nothing this is the video in which I explain another way to use this plotter and more
forward I will show you more features and utilities of this and other plotters,
apart from the comparison that I have pending but it is true that the comparison with ScanNcut
CM900 which is the latest version of Brother, with Cricut Maker which is the latest from Cricut
but the Silhouette plotter that I have is Silhouette Cameo 2, as I still like
another plotter comes well because it helps me to reduce work times and Silhoutte with
the version of the Bussines program allows have several machines cut at the same time
I bought Cameo 3 to be able to make the comparison with the last 3 machines of
each brand and so you can see it clearer because if I compared you with Cameo 2 not
I saw him sense because it is a machine that is no longer in the market and how it comes
ok to have a help machine because when I have to do serial work of many
pieces I can reduce times by sending two machines to cut at the same time.
This is today's video!
Any doubt you can leave it in comments, in messenger, facebook, email ....
all the information to my networks you find it in the information box, I hope it is
useful and see you in the next video ... a big kiss!
For more infomation >> JURAMENTO DE NUESTRA LEALTAD A BHAGAVAN Y SU MISIÓN. - Duration: 3:10. 
For more infomation >> BBB18: Paula diz que vai se afastar de Breno, mas leva resposta dele - Duration: 2:53. 
For more infomation >> Crescimento da emissão de gases poluentes na atmosfera - Duration: 1:54. 
For more infomation >> Primeira festa sem Lucas é marcada por desânimo e clima de enterro no BBB18 - Duration: 3:30. 
For more infomation >> Gossip Uomini e donne, Maria De Filippi umilia Tina dopo lo scontro con Gems |Hot News 24h - Duration: 3:56. 
For more infomation >> 🔴Urgente! TCU mantém indisponíveis os bens de Dilma Rousseff a mulher honesta e honrada - Duration: 1:23. 
For more infomation >> Após o BBB18, Lucas reencontra a noiva na tarde de hoje em São Paulo - Duration: 4:41. 
For more infomation >> Los valiosos consejos de nuestro Jueves de Inmigración | Noticiero | Telemundo - Duration: 3:10. 
For more infomation >> "El problema no son las armas", dice un conductor de radio en Texas sobre masacres en EEUU - Duration: 3:56. 
For more infomation >> Hacker invade Instagram de Lucas após o BBB18 e zera seus seguidores - Duration: 6:24. 
For more infomation >> Au volant de la Kwid, la Renault à 3 500 euros ! - Duration: 1:39. 
For more infomation >> Découvrez tous les bienfaits de l'ail germé - Duration: 8:14. 
For more infomation >> Inchiesta rifiuti, De Luca presenta quattro querele contro Luigi Di Maio - Duration: 2:34. 
For more infomation >> Discours de Rick à Carl | Saison 2 Episode 12 [HD/VOSTFR] - Duration: 1:05. 
Không có nhận xét nào:
Đăng nhận xét