-------------------------------------------
La forte influence de Brigitte Macron sur le président crée des tensions à l'Élysée - Duration: 2:39.
For more infomation >> La forte influence de Brigitte Macron sur le président crée des tensions à l'Élysée - Duration: 2:39. -------------------------------------------
Animación engranaje de doble HÉLICE en; INVENTOR - Duration: 5:21.
For more infomation >> Animación engranaje de doble HÉLICE en; INVENTOR - Duration: 5:21. -------------------------------------------
Les signes de l'amour du Prophète (saws) - CHEIKH RAJAB DIB - Duration: 18:55.
For more infomation >> Les signes de l'amour du Prophète (saws) - CHEIKH RAJAB DIB - Duration: 18:55. -------------------------------------------
Misteriosa desaparición: Revelamos quién mató al esposo de Carmen Martínez-Bordiú - Duration: 10:10.
For more infomation >> Misteriosa desaparición: Revelamos quién mató al esposo de Carmen Martínez-Bordiú - Duration: 10:10. -------------------------------------------
Ces proches d'Emmanuel Macron qui "rêvent de faire disparaître" Brigitte Macron - Duration: 2:40.
For more infomation >> Ces proches d'Emmanuel Macron qui "rêvent de faire disparaître" Brigitte Macron - Duration: 2:40. -------------------------------------------
Móvil de Dios Los Punsetes (con letra) - Duration: 2:56.
For more infomation >> Móvil de Dios Los Punsetes (con letra) - Duration: 2:56. -------------------------------------------
Scie circulaire sur table PARKSIDE LIDL PTK 2000 D3 A1 : QUOI DE NEUF ? what's new - Duration: 10:11.
my videos are with subtitles
table saw - PARKSIDE - Higher prices and lower quality?
hello, we will see the differences between the first model PTK 2000 A1 and the latest version PTK 2000 D3
A very important change: A1: manufactured by SCHEPPACH, D3 manufactured by GRIZZLY
(for that reason it deserved a little presentation ...)
another important change: the weight, it went from 28.5 KG to 21.5 KG
The main features
1- Year, 2- Manufacturer, 3- price, 4-weight, 5-power, 6-service, 7-speed, 8-dimension table, 9-side extension, 10-extension rear, 11- cutting height
The main board: little difference (writing PARKSIDE and more)
A1: protections on the sides of the blade
now there is no longer
laser cutting: it's the same
before there was a pipe (if we used a vacuum cleaner), now there is more
height: the old version is 2/3 centimeters higher (not significant)
now the "OFF" button is up (before it was down)
2 in 1: the crank is turned for the cutting height
I unlock, and here for the cutting angle
angles indicated: 0 - 15 - 22.5 - 30 and 45 °
to block
front: 1 lever for height and 1 lever for cutting angle
we tighten to block
front: of heavy-duty steel sheet,
now plastic
that explains the difference in weight
before graduation and rule adjustment: only the main board
now the rule and the graduation makes the whole of the table
the product is new, never used, it is frayed
it's damaged
on my old model, no problems
the right side the pusher, now it is held by clips
a drop in quality in the plastic (and was more resistant before)
now there is a cable slot (which was not there before)
simplified editing?
Parkside indicates a simplified assembly (compared to the old version), it is indicated on the box of the product
it's true, it's faster to climb (I spent less than 2 hours losing 30 minutes on a screw ...)
the feet are integrated in the base which saves a time of assembly (before it was on a base)
theoretical control of the angles
presentation soon on the secondary channel, it will allow me to control the angles
I control my angles 15 - 22,5 - 30 and 45 ° c
I indicate the average deviation in red
I repositioned on 0 ° I have 0 °
same with the old saw
15 ° 15 ° 22 and a half 22 35 30 degrees 29,95 45 ° 44,70 already we can note that before he
average deviation 0.1 °
before, we could fine-tune the angle (a line on the numbers)
example at 15 ° (a visible line)
now the line does not come down completely, a source of imprecision?
the line would better adjust the angle (damage)
practical thing: a bag is included (if you do not use a vacuum cleaner) before there was none
quality of the tray: I can not tell you, simply the new tray is already with marks (right out of the box)
I ruined a screw ...
I had a problem removing a screw from the tray, I damaged the screw
the screw that was here (this screw)
I did not succeed with screw extractors ... I had pierced the screw ...
be careful if you open the tray ...
noise
2 centimeters cut
the cutting rule is the same, we have a line to see precisely
before there was a magnifying glass (I do not like it too much)
before the cutting rule was stable, now it is a little less stable (I do not think it impacts the cut)
I cut 2 centimeters of wood using the cutting ruler
the measurements on the 4 sides, average deviation: 0.4 millimeters
the measurements on the 4 sides, average difference: 0.8 millimeters
interior
to be continued...
what's up ? It's over
a test soon
leave your opinion, I feel like a general decline in quality
old corner guide and the new corner guide
305 grams (D3) / 472 grams (A1)
leave your opinion, thanks and see you soon ++
Không có nhận xét nào:
Đăng nhận xét