- Hi welcome to UndergrowTv again... This is Weed Art. What are we going to make today Hector?
- Today we're going to make an scorpion.
- Here is our official roller... Scorpion time.
- What do we need Hector? For this scorpion formed joint, we'll need a roll of paper that we'll cut
- in 2 long pieces to make the central joint, scorpion's body... Pretty fat because then we must do a few holes to
- insert legs... Then 3 thiner joints, as legs... Then a couple of cones
- for scorpion's weapons... A few wood sticks to insert inside legs and hold it better in this shape.
- We'll need a big mouthpiece so a little of cardboard to make it...
- Normal mouthpieces for weapon joints... And the basics... Weed. For this scorpion joint we'll need
- between 10 and 15 gr and we'll use Mr.Weed Pass from Mr. Hide Seeds bank... The first step, central joint.
- Our official roller Hector seems to be ready... To create the first joint. The first one will be the central joint
- that will be the base for the entire scorpion. Then we can make a few holes and insert legs carefully.
- He picked up a rolling paper cutting it in 2 pieces of 20cm aprox...
- You'll choose the size depending on your weed's quantity... Then you should only stick them toguether
- to get a big paper. Wet the glue and dry it later to get a high resistant paper.
- Now simply add the herbal product... It's already well grinded... And we'll avoid air bags and it will be easier
- to roll. We'll continue cutting cardboard mouthpiece. This time a standard will not be enought. We'll neeed a
- bigger one. As you see, he cut cardboard with this simple wave form.
- Easiest way to make a conic mouthpiece.
- After rolling it to avoid any kind of fibber in our throat,
- you can involve it in paper to fix it a little bit more.
- Once the mouthpiece is done, let's do the central joint. Pick the paper up and add the herbal product.
- Like... 5 gr as we said... We didn't used the scale but... It looks like it's full.
- Now fix the mouthpiece and simply roll it as always... Be careful because it's big.
- Once the central joint is done, let's start doing the legs... So let's do 3 joints... Exactly the same.
- Cut a 15 cm paper and then add like... 3 or 4 gr of herbal product, and a stick.
- Use those wood sticks... As plain as possible to make an easier extraction. Normal rolling method,
- from one of the sides, and simply stick it. We'll get a joint without any mouthpiece... Both sides opened.
- Now let's do 2 more like this one. We'll get 3 legs that, being showed in the sides, so 6 legs appart from the tongs.
- Now let's do the tongs. Start doing a medium sized conic joint... Bigger on the top and thinner on the bottom,
- to imitate scorpion tongs better. A trick is doing a conic mouthpiece, that will give form
- to all joint's line. Prepare a couple and let it resting. Now let's perforate the central joint
- to mark the place to fix the legs. Perforate scorpion's body... We'll perforate
- the hole for the tongs too... And there it is. Once we've got the reference, only substitute sticks
- for joints. Remove toothpicks and, with a conic tool, like a pencil or simply something with the same size,
- do a bigger joint to pass the joints throught. Now let's fix the joint... It's really important that
- leg joints tops should be really well closed to fix it inside easily. Let's do a central hole
- for the passing joint before introducing it to create a smoke circuit... Now it's the hability moment... Softly pass it throught
- the central body. Toothpicks are a great help. Now simply pull with patience,
- we don't want to break the paper... We must introduce it until the central hole we've done. Then we can remove
- the stick and if it's well fixed, it should be sealed. You can always use a little of stick but it's not necessary
- this time because our official roller did it perfectly. Close the tops while you manipulate not to loose nothing.
- Let's follow with the next leg... Other passing joint... Let's do a bigger hole with our steel tool.
- And now let's fix the passing joint. Introduce it easily... Turn it a little bit... It will get in without breaking nothing.
- It's really important to spin it to introduce it because we'll avoid all kind of damage to main joint... Do the same
- the third now...
- All legs are already done... It will be always positive to use some effort sticks.
- Use it as a patch to cover all kind of error. If you've done it... The difficult part is done. Now let's fix the tongs.
- Remove sticks from the legs first... Now simply remove them spinning a little bit...
- Finish every leg and close them... Once we've done all of them, it will be the moment
- to fix the tongs. Simply remove guide sticks and stack joints at its place.
- Now that everything's ready, we can give the paper some manual touches to make it seem a scoprion a little bit
- more... Turn the tail up a little bit... And make it seem a little bit more like the animal. Everything will be easy to form
- but must be careful to form the tongs... Use some extra glue to reforce the manual work and avoid all kind of problems.
- Well partners... It's ready. Let's ignite it... We hope you did it like us.
- Let's smoke the anthens... Then we'll smoke the rest.
- Well... Once we've smoked the tongs, we've removed the rests and after covering the holes with paper,
- let's ignite the full group... This is the moment where the joint could not burn nicely... If it happens to you,
- it uses to be connection leg holes... Simply seal it with some smoking paper glue... And perfect.
- Good smoking people.
For more infomation >> DIY | EXPOSITOR DE VARINHAS de HARRY POTTER | ft. A Vida Como Eu Vejo - Duration: 2:23. 
For more infomation >> Guillotina de resma - Duration: 0:41. 
For more infomation >> U&D, Anna Tedesco contro il dating di Maria De Filippi? Ecco le parole sospette | M.C.G.S - Duration: 3:53. 
For more infomation >> Shakira finalmente habló de su futuro en la música || Últimas Noticias - Duration: 2:30. 
For more infomation >> De Voitures Nouvelles Tauro V8 Spider: roadster espagnol en visite à Goodwood - Duration: 2:16. 
For more infomation >> Tierra de Dioses, Egipto (2ª parte) - Duration: 18:45. 
For more infomation >> France Gall hospitalisée, son entourage donne de ses nouvelles - Duration: 2:30. 
For more infomation >> Los tipos de queso más saludables - Duration: 9:59. 
For more infomation >> Uomini e Donne, Maria De Filippi si è stufata di Gemma? | Wind Zuiden - Duration: 3:28. 
For more infomation >> De Voitures NouvellesRenault Twin'Run Concept: du Grand prix de Monaco à Goodwood - Duration: 3:12. 
For more infomation >> Comment préparer de l'eau d'aubergine avec du citron pour perdre du poids - Nouvelles Santé - Duration: 5:52. 
For more infomation >> De Voitures Nouvelles Bugatti Chiron : vers des sommets inédits - Duration: 3:14. 
For more infomation >> Diffusion en direct de OXI VEGLI YT LIVE - Duration: 5:03. 
For more infomation >> Hoppa in de benen: 5 x waarom je binnenkort absoluut een keer naar Zwolle moet - Duration: 5:53. 
For more infomation >> De Voitures NouvellesHonda Fit Sport 2018 : pour les sapiophiles - Duration: 7:21. 
Không có nhận xét nào:
Đăng nhận xét