Waching daily Apr 26 2017

- Hi guys!

-Hello!

-Kate, I'd like to make some recipes with spices,

because we have a lot of recipes with spices in the game, My Cafe: Recipes & Stories.

and I see that you already have something on the table.

-Yes, a couple of things.

-What are we going to make?

I suggest that we make strong coffee,

but we will flavor it with star anise,

cardamom, and rose...

We'll come up with something

-Okay, then I'm going to leave you here,

it's going to be your laboratory,

and then I'll make a taste test

-Good.

-Okay, Bye!

Im going to make two recipes with coffee in cezve

The first recipe will have star anise,

the second one will be with rose and cardamom.

Both recipes will be sweetened by cane sugar.

Let's start making the first recipe.

Throw in 2-3 pieces of cane sugar,

take one star anise

and add a few water drops.

Caramelize sugar on sand

sugar has melted and absorbed star anise flavor

now we can add coffee,

fill it with 2 ounces of home temperature water

and take the cezve back on sand.

We need around 1 tablespoon of fresh ground coffee for on cup.

You also need to stir the mixture,

before you take the coffee to the sand.

The cezve should stay on stove or sand for several minutes.

After that, the foam starts rising.

When it happens, slowly put the cezve up.

You can repeat it, if you want to make your coffee stronger

Pour the coffee into a cup,

The drink is ready

Our cameraman told us to stand still right now :)

Can I taste it?

- Yes, sure!

- Wow, thank you, I even have a plate.

- Feel the flavor first, then make a couple of sips.

The coffee had a bright smell of star anise, and the texture was really thick!

Wow, I feel that the coffee is strong,

because... it has spent a lot of time in cezve on sand

But the sugar makes it taste softer

And... you know I have read that star anise is really good against cough

So, when you catch cold or fall ill, you can drink it,

not before sleep, though.

It will keep you energized.

.. and satisfied! Ha-ha!

Thank you, I really like it!

Let's make the other one!

Let's go!

We are going to make coffee with cardamom and rose water in the next video.

This week, you can make coffee with star anise in cezve and win game diamonds in the contest.

Read more about it in the description, and thank you very much for watching!

For more infomation >> How To Make Coffee with Star Anise. Recipe from My Cafe and JS Barista Training Center - Duration: 4:24.

-------------------------------------------

Repas fete de l'été - Duration: 1:33.

For more infomation >> Repas fete de l'été - Duration: 1:33.

-------------------------------------------

Agua de berenjena con limón para adelgazar rápido | APERDERPESO.COM - Duration: 2:02.

For more infomation >> Agua de berenjena con limón para adelgazar rápido | APERDERPESO.COM - Duration: 2:02.

-------------------------------------------

Le XIXe siècle - Un peu d'histoire - Duration: 3:46.

For more infomation >> Le XIXe siècle - Un peu d'histoire - Duration: 3:46.

-------------------------------------------

La Renaissance - Il n'y a pas que la peinture dans la vie - Duration: 3:05.

For more infomation >> La Renaissance - Il n'y a pas que la peinture dans la vie - Duration: 3:05.

-------------------------------------------

Mahia Tik Pow Ajj De | Muhammad Hussain Bandial | Old Punjabi Original Audio Song | Punjab Virsa - Duration: 6:43.

For more infomation >> Mahia Tik Pow Ajj De | Muhammad Hussain Bandial | Old Punjabi Original Audio Song | Punjab Virsa - Duration: 6:43.

-------------------------------------------

Le XXe siècle - Les clefs du XXe siècle - Duration: 6:22.

For more infomation >> Le XXe siècle - Les clefs du XXe siècle - Duration: 6:22.

-------------------------------------------

Le XXe siècle - Un peu d'histoire - Duration: 4:17.

For more infomation >> Le XXe siècle - Un peu d'histoire - Duration: 4:17.

-------------------------------------------

Maza Esterilla (Básica) | Mace Foam (Basic) - Duration: 6:37.

Good afternoon and welcome to Cosplay Factory

My name is JackLeBlanck

And today I'm here to teach you how to make our own foam mace

This way when we are finished we can do things like these

And now, without further delay, let's go through the list of materials and let's get started!

For this tutorial we will need

White glue, contact cement, and some paintbrushes

Lighter and broomstick

Paper, pen and rule

Foam and cutter

Polystyrene ball

Let's get started!

The first thing we will have to do is draw our templates

For it we will draw in a folio a rectangle of 11 by 4.5 centimeters

Once we have drawn it we will mark a point to 2 centimeters of height in the left side of the inferior line and soon we will mark another point to 3 centimeters of left side in the line superior

Finally we will join these points together with curved lines, the first will be a curve inwards and the second outwards

Now we will cut everything with the precision cutter and we will proceed to draw the following template

For this second template we will have to draw a triangle of 8 centimeters of base and 4 centimeters of height

Then we will cut it and we will have ready our two templates

For our next step we will need a 50 cm by 14 inch mat with a thickness of half a centimeter

We have to apply glue to one of its faces, in our case we have chosen the striped face to apply the glue

For the contact cement to make its effect and once it is dry we will join it

For this we will have to fold in half the strip of foam our purpose is to create a surface much more resistant to be able to make our pieces

Press strongly with the fingers so that everything is well stuck. Once it is attached, we will mark the template on the mat

Remember you can help with a few pushpins or pins to hold your template the mat

We will have to make 4 pieces of each of the two templates

In total there must be 8 pieces, once they are all drawn cut with the precision cutter

To remove the small flaws and defects that appear on the mat after having cut it will apply with the help of the burner small bursts of heat, this way we will eliminate all those imperfections

Now that we have our 8 pieces cut we can move on to the next step

To realize the base of the head of the mass we will need another piece of mat of 10.5 by 11 centimeters

Glue is on the two sides of 11 centimeters

We will let the glue effect and once it is dry we will join it

For it we will have to go one side with the other rolling it like a tube

This piece has to fit perfectly in the tube that we will use as axis of our mace

Now that we have it ready the next thing we will have to do will be to score in this four points

The marks that we make are simply guide marks, do not have to be perfect, in these four points will be placed the large pieces that we cut before, forming a cross and in the middle of these will be placed the triangles

Now we will glue the foam tube

And while it is dry, we will glue the long side of each of the pieces

Including triangles, we will let them dry and once dry, we will join them

With great care we will start joining the big pieces in the four points that we have marked

Once they are all glued together forming a cross, we will glue the triangular pieces, press strongly so that everything is well glued

When everything is ready, you will have finished the head of your mace

Our next step is to make the shaft bezels, for this we will need different pieces of foam of 10.5x2 centimeters

What we will do next is to glue the short sides of the strips and once they are dry, we will join them forming tubes or circles

Once they are glued we can start with the assembly, first we must check that all the pieces fit in place

We will apply glue on the top of our axis, with the help of some of the foam tubes, we will extend the glue. Then place the mace head in place

The head is almost ready, just need to add a small ornament, in this case we have used a small styrofoam

The only thing we have to do is place it on the top of the hub, first we press against the axis and in the notches or marks that are generated we add glue and we put it together

Now we put the ornament of the base of the shaft, we use another ball of polystyrene a little bigger and we repeat the previous action, we press the ball against the axis so that a mark is created

Then we will glue all over the lower part of our axis and introduce the lower bezels to spread the glue as we did before

Do not worry if the shaft is stained, then we will clean it, if necessary use more glue so that everything is well glued

While the glue is drying, take advantage and clean the remains on the shaft

It is advisable to use a dry napkin to remove the larger debris and then use a wet napkin to clean what is missing

Once clean, let it dry and you will already have your mace ready

And so far the tutorial of today, I hope you liked it and help you for your next cosplays

If you liked the video, give me a like

If you are interested in what I do, subscribe!

If you have any questions leave a comment

And see you in the next tutorial!