Waching daily May 3 2018

♫ [ latin music ] ♫

Heeeey, gambiarristas !

I was missing a lot !

In today's video, I'm going to be teaching how to make clapperboards

This one was made with wood.

I reused a piece of my wardrobe drawer

that broke.

So, I asked my father to arrest here,

put a piece of wood here

and hold to make that effect.

Pretty cool, huh?

And with that same tip here,

the same way I

I did this clapboard here,

You can assemble this one here on paper.

which is a little simpler, but has the same effect.

But the way to arrest is different.

There is this piece that unites the pieces

but I held back with pieces of rope

so that you can move.

I know you have not even learned yet,

but if I were you, I was already leaving a like to help

because I still have a lot of cool things to bring to you

and this like will help a lot, a lot in boosting this video

Help me !

Let's go to the video !

Well, as I had already told you,

I'm reusing these pieces of wood.

They have the same width and thickness as similar

The measurements of this board are not on the screen,

because you will use the measurement of the board you have.

I asked my father to attach these two screws,

one on top and one on the bottom,

having the union of these inserts

this smaller piece of wood.

In this way, I can raise and lower this plate,

giving the clapper effect.

Important: cut the bottom of this tip

of the thinner plate

to make it move more easily.

Look how easy it gets.

Turn up!

After that, measure the height of your small plaque

and on the larger board, mark to the same extent

The way I'm showing here

Stick pieces of duct tape,

creating the drawings of the arrows that they have in clapboards.

Stick from the smaller card to the markup you made.

This will protect this area of ​​ink

when you paint.

Paint everything in black.

Now that the area is protected,

you can paint without fear of being happy!

After painting everything, remove the ribbons.

You may notice that the tape did not protect 100%

but there's no problem.

Paint that area you had protected with white paint.

Then customize as you like,

including how you will draw

the sections of the clapper.

To make the paper,

just cut the cardboard in the same format

of the pieces I used to assemble the wooden clapboard.

The assembly is the same, the difference is that to attach,

I used bits of rope and glued the underside of the clapboard into the union

not to get loose when I move the clapper.

♫ [ latin music ] ♫

To see videos like this,

sign up for the channel and activate the bell!

Enjoy that you're here

and click on this video below

for you to see this super cool tip!