Today we're introducing the new DaVinci IQ vaporizer.
It is available in 4 colours: stealth, gunmetal, copper and blue.
For every taste.
This is the box of the DaVinci IQ. Let's unbox it now
and see that we have the vaporizer here at the top,
the instructions manual here, a sticker and 3 boxes. One, two, three...
Let's see what we have in the larger box, which says "Accessories".
We have a power cable, a battery charger,
and a miniUSB - USB cable to connect the device
a computer or any other power source.
What else? We have a DaVinci keychain
with a small tool inside it to detach
some of the parts of the vaporizer.
We also have a chimney brush to clean the chamber
and some alcohol wipes to clean other parts.
2nd box. This is curious, because we have another keychain here
but this time with a small carry can
to store some herb to vaporize later on.
The third box contains - as we'll see now - an extra mouthpiece,
a bit more similar to those found in other DaVinci vaporizers.
Let's take a look at the chamber, which is on the lower part of the device.
Open it and check that it is quite large.
It has a ball here that will press the herb
when the chamber is closed, leaving it ready to vape.
The mouthpiece is on the upper part,
as well as the flavor chamber, which can be removed for cleaning.
We also have the battery compartment here.
The battery can be removed and replaced
for a fully charged one if necessary.
As we've seen before, the mouthpiece is also removable.
You can use either the flat mouthpiece
or the one with a small adapter, just by doing like this.
Insert the flavor chamber back and the device is ready to work.
Let's fill the chamber now.
Open the lower compartment, grab some dried herb,
grind it a little bit and insert it into the chamber.
Close it and it's ready to use.
Turn on the vaping device by pressing
the upper button 5 times. One, two, three, four, five.
The display here shows the battery level
and the current vaporizer temperature.
Set the desired vaping temperature with the up and down buttons.
We'll set it to 185ºC.
Once the set temperature is reached
the device will vibrate and we can start vaping.
We can also enter the Program mode.
There are 4 pre-sets, four different programs that we'll see later
with the App. To switch between the Manual and Program mode,
simply press the On/Off buton and we already have the pre-sets.
Here, 2 small squares mean pre-set 2, press the down button and
we have pre-set 1, and up again until we find our desired program.
In this case, when it reaches pre-set 4 it will vibrate.
Let's see now how the App works. It is available to download for both
Android and IOS devices, it's called IQ DaVinci and it's quite simple.
We have a menu on the upper left corner
with different submenus that we'll see now.
First one is Dashboard, which is the main page
of the current status of the vaporizer.
We have a graph with temperatures and time,
and a white line graph which shows
the current temperature of the device.
You can lower the temperature with these buttons: target (red)
is slowly going down while temperature tries to reach it... great.
To raise it we do the same.
We'll program now a vaping temperature,
which we can see raising in the graph , to 185°C.
Once this temperature is reached,
your phone will make a sound to indicate that it is ready to use... perfect.
Let's see now the Setting menu, which allows us to control more things.
First, the IQ vibration system:
we can deactivate it or activate the Stealth mode,
which will lower the intensity of the LEDs
if you want a darker environment.
Enter the App now. We can either activate or deactivate it,
and select the temperature mode.
Now we have the C degree in red, which means
we're using Celsius degrees. If we go back to the Dashboard,
we'll now see the Target and Temp in Fahrenheit,
but we prefer Celsius, so we'll set it.
Check the Dashboard, correct, 185ºC.
What else do we have?
We can enter the Pre-set or Smart Path menu.
We have now 4 different pre-sets (10 minutes each)
to control the vaping temperature during this period of time.
For example, we have a pre-set called "Lemon"
to vape our Lemon herb.
Simply go to Edit Path and set the desired temperature with the buttons.
For example, minute 1 at 177ºC...we'll set now 190ºC for minute 6...
and finally we'll end our vaping session at 230ºC.
Just by moving it we get the time/temperature graph of our vaporizer.
Now, save the pre-set
and we already have one of the 4 pre-sets.
These pre-sets can be activated later on from the vaping device,
or directly through the App.
Now we only have to enjoy it !!
For more infomation >> Humberto Solás - Festival de Cine Pobre [Havana Cultura] - Duration: 5:17. 
For more infomation >> Message vidéo de Masami SUDA - Duration: 1:02. 
For more infomation >> Aderezo de Frijoles para Ensaladas - Duration: 3:16. 
For more infomation >> La Consciencia de la Unidad - Duration: 11:10. 
For more infomation >> Paris Histoire : un président au septième ciel - Duration: 1:15. 
For more infomation >> Sasc realiza capacitação sobre o Cadastro Único - Duration: 2:03. 
Không có nhận xét nào:
Đăng nhận xét